Wireless Products
JUPITER™ System with DVB-S2X
JUPITER System Gateways
Recognizing that networks operating over conventional satellites using 36 or 72 MHz transponders are different from HTS networks, the JUPITER System has a gateway configuration that is designed and optimized for conventional satellite operations. The HG220 gateway comes with a single chassis that can support up to four SMCs. An integrated L-band matrix switch enables a redundant SMC to come online to take the place of the primary SMC, allowing the HG220 to support 1:N redundancy. The Hughes-developed L-band matrix can connect the SMCs to different transponders or satellites. The HG220 also comes equipped with integrated IF distribution, timing system, NMS with firewall, Gigabit LAN switch, and intelligent power distribution. All components are 1:N redundant with automatic fault detection and switchover.
SATELLITE ROUTER
As part of the market-leading Hughes JUPITER™ System the HT2000 is the powerful, next-generation satellite terminal featuring support for wideband DVB-S2X forward channel,
delivering the industry’s best efficiency. The return channel uses powerful and advanced Low Density Parity Coding (LDPC) in conjunction with Adaptive Inroute Selection (AIS) for industry-best performance. The HT2000 features best-inclass throughput performance, delivering up to 200 Mbps of throughput and the capability to support the most bandwidth-intensive and demanding applications.
The HT2000 terminal features a small desktop chassis with a single GigE LAN port, and a single cable IFL for interface to the outdoor unit (ODU).
The HT2300 features best-in-class throughput performance, delivering up to 200 Mbps of throughput and the capability to support the most bandwidth-intensive and demanding applications. The terminal incorporates an easy-to-use embedded Web Graphics User Interface (GUI) that provides a local interface for quick and reliable installation, status monitoring, troubleshooting, and diagnostics.
The HT2300 terminal features a desktop chassis suitable for installation in a range of locations from homes to offices. The terminal supports dual-cable IFL that enables use of an industry standard L-band interface to the outdoor unit, as well as operating on a wide array of operating frequencies with a variety of high-power BUCs. The HT2300 comes equipped with 4 GigE LAN ports.
The HT2500 Series terminals support wideband DVB-S2X with Adaptive coding & modulation on the forward channels in order to maximize occupied bandwidth. The return channel uses an MF-TDMA waveform with a powerful and advanced Low Density Parity Coding (LDPC) in conjunction with Adaptive Inroute Selection (AIS) for maximum performance. Some variants of the HT2500 series support TDM return channels as well.
The HT2500 is a high-performance satellite router designed to be installed in an industry standard 19″ equipment rack suitable for data center environments, most enterprise facilities and carrier facilities. The compact design consumes only one rack space (1U rack mount) and supports a variety of power options. The terminal supports industry standard L-band interface to the outdoor unit, as well as operating on a wide array of operating frequencies with a variety of high-power BUCs. The HT2500 comes equipped with 4 GigE LAN ports.
Although every terminal delivers up to 300 Mbps throughput, different variants of HT2500 series are custom-built for various Applications. The below matrix highlights features of every terminal in the HT2500 Series portfolio.
The HT2600 series delivers high throughputs and is capable of supporting bandwidth-intensive, simultaneous multimedia applications with the ability to switch from a dynamic TDM inroute to MF-TDMA inroute, thus allowing service providers the flexibility to adapt to varying traffic needs of network operators. In addition to offering exceptional performance the HT2600 series employs either MF-TDMA inroutes using powerful and advanced Low Density Parity Coding (LDPC) with Adaptive Inroute Selection (AIS), or dynamic TDM inroutes for dedicated links to accommodate integration of a wide variety of applications.
This series of high-performance satellite routes are available in an all-outdoor IP67 enclosure with DC power supply options. In addition to a compact structure, this series of satellite routes support a variety of power options. The terminals support dual-cable IFL that enables use of an industry standard L-band interface to the outdoor unit, as well as operating at wide array of frequencies with a variety of high-power BUCs. These VSAT terminals also feature an IEEE PTP 1588v2 native GPS receiver to provide timing coordinates to the collocated radio base station.
ANTENNA 120cm Ku Band
| Item No. | VSAT E120 | |
|---|---|---|
|
REFLECTOR DISH |
||
|
Type: |
Elliptical |
|
|
Offset Angle: |
18.29° |
|
|
Physical Size Short Axis: |
118.4cm |
|
|
Physical Size Long Axis: |
122.1cm |
|
|
Aperture Diameter: |
117.2cm |
|
|
F/D Ratio: |
0.75 |
|
|
Focus Length: |
866.5mm |
|
|
ANTENNA SPECIFICATIONS |
||
|
Operation Frequency: |
TX |
RX |
|
Efficiency: |
13.75 ~ 14.5 GHz |
10.7 ~ 12.75 GHz |
|
Ku-Band Gain: |
70% Min. |
70% Min. |
|
3dB Beamwidth: |
43.7dBi @14GHz |
42.0dBi @12.75GHz |
|
Cross Polarization on Axis: |
1.2° Max. |
1.4° Max. |
|
within 1dB Beamwidth: |
30dB |
25dB |
|
Feed Interface: |
WR75 |
WR75 |
BUC & LNB
Block Upconverters (BUCs) and Low Noise Block (LNBs) set standard for precision RF performance and reliability at a cost effective price point.
ACCESS POINT &
GATEWAY CONTROLLER
High-Performance 802.11ac 1200Mbps Dual Band Outdoor Access Point
- Latest 802.11ac/b/g/n standard
- Data Rate – 5GHz: 900Mbps
– 2.4GHz: 300Mbps - Build-in 14dBi and 12dBi panel antenna
- IP65 professional ABS plastic enclosure
- 26dBm aggregated transmit power
- Supports multi SSID upto 8, DDNS, VPN passthrough, port forwarding and DMZ host.
- 64/128 bit WEP security, 128 bit WPA (TKIP/AES) security
- Supports Gateway (PPPOE, Static IP, Dynamic IP).
- Operations modes: Wireless AP, Repeater and WISP.
- IP filter, URL filter, MAC filter support
- Interface
৹ 1 x 10/100/1000 Mbps WAN Port
৹ 1 x 10/100/1000 Mbps LAN Port
৹ 1 x Reset button
E-LINK Rapid 6.0 Wave 2.0 MIMO Dual-Band 1300 Mbps Outdoor Access Point
- IEEE 802.11ac Wave2.0 Outdoor AP
- Dual-band, 1300Mbps Data Rate; 300mW high power
- 4 x N type connector, can work with omni/panel antenna
- Supports IEEE 802.03at PoE standard
- Supports SSID broadcast
Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz) - 128 max users
- Supports Beamforming, Band Steering
- WAN: 1 x 10/100/1000 Mbps
- Central WLAN Controller allows Remote Management
- Supports DNS, VPN pass through
- Supports Port forwarding and DMZ host
- IP67 Outdoor metal enclosure
Stream Plus 802.11ax 4×4 MU-MIMO AP
- 802.11ax 4×4 MU-MIMO Outdoor Wi-Fi AP
- Dual-band operation in 2.4GHz & 5GHz
- 2.4GHz: up to 1147 Mbps data rate
- 5GHz: up to 2402 Mbps data rate plus more
- 17 dBm per chain Tx or 23 dBm aggregated
- OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024QAM
- Supports Dynamic Frequency Selection (DFS)
- NLOS Urban Coverage with OFDM Technology
- SNMPv3 and Enterprise MIB for Advanced Network Management
- High Spectral Efficiency and Robust RF Network Performance
- Rugged Construction for All Weather Conditions
- High Spectral Efficiency and Robust RF Network Performance
Stream Pro 802.11ax 8×8 MU-MIMO AP
- 802.11ax 2x(4×4) MU-MIMO Outdoor Wi-Fi AP
- Dual-band operation in 2.4GHz & 5GHz
- 2.4GHz: up to 1147 Mbps data rate
- 5GHz: up to 4804 Mbps data rate plus more
- Max 23dBm per chain or 29 dBm ( 2 Chain)
- OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024QAM
- Supports Dynamic Frequency Selection (DFS)
- 1 x 10Gigabit Ethernet LAN/WAN RJ45 Port
- 1x SFP+ Port
- Surge Protection
- NLOS Urban Coverage with OFDM Technology
- SNMPv3 and Enterprise MIB for Advanced Network Management
- High Spectral Efficiency and Robust RF Network Performance
E-Link Blaze Wave2.0 MU-MIMO 1200Mbps Dual Band Access Point
- Indoor MU-MIMO 802.11ac/a/b/g/n Wi-Fi AP supports dual-band operation in 2.4GHz & 5.8GHz (Wave-2)
- Dual-band – 2.4GHz + 5GHz
- 2 x 2 MIMO Technology, up to 1200 Mbps
- 128 Simultaneous Users (64 in 2.4GHz + 64 in 5GHz)
- 360-degree coverage
- Increased Receiver Sensitivity for better coverage
- User Access Control (define radius of AP)
- Beamforming
- Central Controller Managed
- Zero-Touch Configuration from Controller
- IEEE 802.11ac compliant and Backward compatible with 802.11a/b/g/n
- Real Time Network Load Graphs
- Watchdog Timer
- User configured Timed Reboots
E-Link Gateway Controller 1000
Multifunctional Gigabit Gateway Router and Controller for Wireless Access Points
- Enterprise Gateway Controller for Wireless Access Points
- Multiple solutions in one device: Integrated router, flow control, firewall, behavior management, VPN functions, AP controller, etc.
- Multiple Gigabit WAN and multiple routing functions
- 6 x Gigabit RJ45 ports on board
৹ Default 2 Gigabit WAN Port
৹ 4 Gigabit LAN Ports (3 ports self-adaptive) - Group AP Configuration support
- Automatic discovery and configuration of all Wireless APs in FIT AP mode
- Intelligent channel analysis and load balancing
- Smart QoS to configure individual users, user groups and user applications
- TCP/UDP/ICMP Flooding, IP/MAC/URL/Web filtering security mechanisms
- Multiple authentication features
- Works with the third-party Radius server for advertising and billing functions.
- Assigns IP address for Wireless APs
- Separate DHCP rule and firewall can be configured for each LAN
- 1 x Reset Button
- 1 x USB3.0 Port; 2 x USB2.0 Port
- Remote Maintenance, auto firmware upgrade
METEOROGICAL BALLOON & RADIOSONDE
Weather balloons are found at a wide array of meteorological institutions both in Japan and abroad, including at the Japan Meteorological Agency and the Ministry of Defense.
TOTEX meteorological balloons are available in two different types:
TA Type Balloons
• The TA type was developed in 1940 and is made from natural rubber latex compounded with chemicals. It has a high elasticity modulus as well as high tear resistance. The robustness of rubber film allows fully gas inflated TA type balloons to retain its original spherical shape, making it particularly suitable for all weather purpose.
TX Type Balloons
• The TX Type was first developed in 1988 and research continues in seeking a special latex compound with other chemicals in order to reach even severe weather conditions the tropopause where temperature is lower than -75°C and altitudes exceed 10 hPa.
The DFM-17 radiosonde is designed for reliable measurement of the atmospheric profile of pressure, temperature, humidity, wind speed and win direction from the ground to a height of 40km. Data records are continuously sent to the ground station via a stable telemetry connection.
• Designed for balloon borne use throughout the world under all meteorological conditions
• Multi GNSS radiosonde (GPS, GLONASS, BEIDOU)
• Highly stable transmitter
• Low weight, small size
• Simplified handling
• Operating status indicator via status LEDs
• Optional XDATA interface
• Easy ground check via Near Field Communication (NFC)
• Optional barometric pressure sensor
• Optional heated humidity sensor
The main function of the GS-E ground-station is receiving the radiosonde signal and providing local GPS information. All functions of the GS-E are software-controlled by a standard PC via USB
SDR (Software Defined Receiver)
• The radio signal is received by a software-defined PC-based narrowband receiver (400MHz to 406MHz). This PC-based receiver is USB-controlled and compatible with modern desktop and laptop computers with USB interface.
Antenna Switch (Diversity)
• The GS-E provides a USB controlled antenna switch. This gives the possibility to connect two 400MHz antennas at the same time to ensure 100% coverage. The selection of the right antenna is done completely automatically by the software GRAWMET by continuously checking the signal strength of both inputs.
GPS module
• An integrated GPS module provides exact position information of the groundstation. This GPS information can be used for applying differential GPS mode.
DOPPLER RADAR
• LEONARDO Germany GmbH provides highly accurate weather radars with field-proven reliability. METEOR range of C-Band, S-Band and X-Band radars employs breakthrough technologies from meteorology, signal processing and engineering sectors, as well as the semi-conductor and IT industries to deliver the best possible quantitative data. METEOR weather radars are available with magnetron or klystron transmitter and dual polarization.
Accuracy and Reliability
• Our low maintenance weather radar systems have been designed to suit the needs of operational radar users. Featuring narrow pencil beam antennas, unpassed step-response times in elevation and real-time digital signal processing means METEOR systems acquire extremely accurate atmospheric data at high speed.
A Wide Range of Application
• Together with Rainbow®, our best-in-class meteorological software, METEOR systems are used in operational radar meteorology, hydrology, aviation and research for the precise detection and tracking of thunderstorms, wind shear and other sever weather phenomena.Inquire now and we would be glad to hear from you
- Rm 406 AIC - Burgundy Empire Tower ADB Ave. corner Garnet Road Ortigas Center, Pasig City Philippines
- (632) 8 706-2089
- (632) 8 706-2091
- info@enhanced.com.ph